|
|
|
Your donations help keep this valuable resource free and growing. Thank you.
|
Finally, American Racing Headers for your AMC |
Post Reply 
|
Page <1234 15> |
| Author | |
harry401 
AMC Apprentice 
Joined: Feb/03/2018 Location: FL Status: Offline Points: 33 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: Feb/14/2018 at 5:45pm |
|
Very interested in a set for my Matador..... email sent
Thx Harry |
|
 |
|
|
A.R. Headers
AMC Nut 
Joined: Feb/28/2017 Location: Deer Park NY Status: Offline Points: 268 |
Post Options
Thanks(0)
Quote Reply
Posted: Feb/14/2018 at 5:46pm |
They were fitted up with a 727 TF but we located all the clutch linkage to design around that. If you're running a T400 you may have more space. The 727TF is wider. Our prototype car did have a dipstick that we worked around. I don't believe that'll be an issue. Nick |
|
|
|
|
6t8amxetc
AMC Addicted
Joined: Mar/11/2008 Location: Washington State Status: Offline Points: 631 |
Post Options
Thanks(0)
Quote Reply
Posted: Feb/14/2018 at 7:42pm |
|
Thanks for the quick reply. I will be watching with great interest.
The stock Borg-Warner M-12 in a 390 AMX has a large dipstick tube coming from the side of the pan. Could be an issue. Although I have already relocated mine to the front corner. Thanks again...Ty |
|
|
|
|
jpnjim
AMC Addicted
Joined: Nov/25/2007 Location: New England Status: Offline Points: 2752 |
Post Options
Thanks(0)
Quote Reply
Posted: Feb/14/2018 at 9:46pm |
|
Thank you for following through with this!
I just need to figure out if the ballpark price for 1.75" tube/4spd Javelin headers is the ballpark I'm in
 |
|
|
71 P-code 4spd Javelin/AMX
some Jeeps and some Fords |
|
|
|
|
dbomb
AMC Addicted
Joined: Jul/22/2012 Location: new jersey Status: Offline Points: 705 |
Post Options
Thanks(0)
Quote Reply
Posted: Feb/14/2018 at 10:31pm |
|
Will these be ground draggers like most other brands or will they tuck up a bit higher and nicer. That was my concern with all the other long tubes I've seen my car is a street car driver gotta go up driveways and occasional speed bumps. Not just up a trailer ramp. Sounds great let us know more and pricing.
|
|
|
rebuiling 73 amx need parts
|
|
|
|
|
gremlinsteve
AMC Addicted
Joined: Dec/16/2008 Location: houston Status: Offline Points: 884 |
Post Options
Thanks(0)
Quote Reply
Posted: Feb/14/2018 at 10:57pm |
|
I need some headers for my gremlin...
|
|
|
|
|
AMoCoLite
Supporter of TheAMCForum 
Joined: Dec/23/2015 Location: North Texas Status: Offline Points: 441 |
Post Options
Thanks(0)
Quote Reply
Posted: Feb/14/2018 at 11:35pm |
|
Dang it...why couldn’t just promise them...and then not deliver? I thought I was done with the AMX...here we go...again.
|
|
|
|
|
AMoCoLite
Supporter of TheAMCForum
Joined: Dec/23/2015 Location: North Texas Status: Offline Points: 441 |
Post Options
Thanks(0)
Quote Reply
Posted: Feb/14/2018 at 11:38pm |
I’ve got a Hornet that will need them also. 
|
|
|
|
|
gremlinsteve
AMC Addicted
Joined: Dec/16/2008 Location: houston Status: Offline Points: 884 |
Post Options
Thanks(0)
Quote Reply
Posted: Feb/14/2018 at 11:50pm |
|
I'm serious. We have just as many gremlin/ hornets around as we have javelins
|
|
|
|
|
4015spdJavAMX
Supporter of TheAMCForum
Joined: Nov/18/2008 Location: Northern CA Status: Offline Points: 250 |
Post Options
Thanks(0)
Quote Reply
Posted: Feb/15/2018 at 12:37am |
|
I could be very interested, have a 70 AMX with a 600 HP Indy-head 401 (dynoed with Hookers), but they hang too low for a street car. If yours tuck up nicely, could be very interested. Send more details for sure, I did watch the video.
|
|
|
1972 Jav-AMX 401 4-speed....T56 next?
1970 AMX 390 auto, now 5-speed 1970 AMX 390 4-speed, stock |
|
|
|
|
Post Reply
|
Page <1234 15> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Click for TheAMCForum Rules
Topic Options
6t8amxetc wrote: