Your donations help keep this valuable resource free and growing. Thank you.
|
Accelerator cable and bracket |
Post Reply | Page 12> |
Author | |
darnelld
AMC Apprentice Joined: Aug/03/2013 Location: Durham Status: Offline Points: 135 |
Post Options
Thanks(0)
Posted: Aug/30/2022 at 5:43am |
Ok cool. There is no special adapter for the gas pedal? In the original there is just a loop that connects to it, in the lokar cables it looks like there is some kind of clevis. That is the bit I am worried about.
|
|
gremlin1945
AMC Addicted Joined: May/21/2008 Location: new jersey Status: Offline Points: 781 |
Post Options
Thanks(0)
|
I have the Lokar set up on my 65 Rambler station wagon along with the kickdown kit. Haven't had any problems.
|
|
former NHRA #1945
former IHRA #1945 T/SA |
|
darnelld
AMC Apprentice Joined: Aug/03/2013 Location: Durham Status: Offline Points: 135 |
Post Options
Thanks(0)
|
Sorry to bump an old thread. Which Lokar throttle cable worked? 24”. I think I can make the carb side work but not sure if it will attach to my stock 69 accelerator pedal. Thanks for the help
|
|
Class Guy
AMC Addicted Joined: Jul/02/2007 Location: Arkansas Status: Offline Points: 969 |
Post Options
Thanks(0)
|
Excuse me! I meant Carter 9635.
If the memory doesn't get me, the fat fingers will!
|
|
Addicted to acceleration.
Owner and Admin for www.classracerinfo.com |
|
gremlin1945
AMC Addicted Joined: May/21/2008 Location: new jersey Status: Offline Points: 781 |
Post Options
Thanks(0)
|
You got to excuse me and Dwight we're old
|
|
former NHRA #1945
former IHRA #1945 T/SA |
|
DaemonForce
AMC Addicted Joined: Jul/05/2012 Location: Olympia, WA Status: Offline Points: 1070 |
Post Options
Thanks(0)
|
There's some realism behind the phrase All Makes Combined. Even when it comes down to one AMC vs another. |
|
1971 Javelin SST
American 304 2v | FMX | AM20-3.31 1983 American Limited Jeep 4(.7)L S-MPFI | 1982 NWC T-5M (4.03/.76) | Dana30IFS/35-2.72 |
|
THE MENACE
AMC Addicted Joined: Nov/04/2008 Location: So. California Status: Offline Points: 4439 |
Post Options
Thanks(0)
|
Edelbrock #9635 are push rods for a 348 and 409 Cheby! |
|
Former Owner of:
The Craig Breedlove "AERO AMX" Still Owner: SS/AMX #9 replica (THE BIG MENACE) 70 AMX 416, EFI, Nash 5 speed 70 Javelin 401, 727 (Wife's car) 72 Gremlin Autocross Project. |
|
Class Guy
AMC Addicted Joined: Jul/02/2007 Location: Arkansas Status: Offline Points: 969 |
Post Options
Thanks(0)
|
Ed, I used a bracket, cable and pedal assembly from a mid-70's Matador on a '67 American once and it fit easily. 360 with a factory cast iron manifold and an Edelbrock 9635.
|
|
Addicted to acceleration.
Owner and Admin for www.classracerinfo.com |
|
harry401
AMC Apprentice Joined: Feb/03/2018 Location: FL Status: Offline Points: 33 |
Post Options
Thanks(0)
|
I am using the billet combo bracket for the cable and kick down. Bolts to the back of edelbrock carbs......nice piece and works better than factory linkage
|
|
THE MENACE
AMC Addicted Joined: Nov/04/2008 Location: So. California Status: Offline Points: 4439 |
Post Options
Thanks(0)
|
The Lokar cables are pretty versatile. I have one on my 70 AMX, but I fabricated my own bracket at the throttle body. The bracket supplied would have probably worked for most, but I have a big drop on the air cleaner base that I had to stay below. |
|
Former Owner of:
The Craig Breedlove "AERO AMX" Still Owner: SS/AMX #9 replica (THE BIG MENACE) 70 AMX 416, EFI, Nash 5 speed 70 Javelin 401, 727 (Wife's car) 72 Gremlin Autocross Project. |
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |