Your donations help keep this valuable resource free and growing. Thank you.
|
Steering Column Restoration |
Post Reply | Page <123 |
Author | |
71SC360
AMC Addicted Charter Member Joined: Jun/29/2007 Location: East Tennessee Status: Offline Points: 5477 |
Post Options
Thanks(0)
|
Should be a 12 point standard 7/16 socket.
Or maybe a 1/2" |
|
CamJam
Moderator Group Joined: Jan/04/2014 Location: Arizona Status: Offline Points: 6549 |
Post Options
Thanks(0)
|
One last step and it's apart! The steering shaft is out. Now how do you get the inner tube out of the outer column? This black slotted collar around the inner shaft is like a Chinese puzzle... I've twisted it every which way while moving the tubes in an out trying to get the slots to line up and let go, but it just ain't happening! As usual, the FSM is no help.
Edited by CamJam - Feb/07/2015 at 9:31pm |
|
'73 Javelin 360 (current project)
'72 Baja Bronze Javelin SST '69 Big Bad Orange AMX (2018 Teague Heritage Award) SOLD |
|
CamJam
Moderator Group Joined: Jan/04/2014 Location: Arizona Status: Offline Points: 6549 |
Post Options
Thanks(0)
|
|
|
'73 Javelin 360 (current project)
'72 Baja Bronze Javelin SST '69 Big Bad Orange AMX (2018 Teague Heritage Award) SOLD |
|
71SC360
AMC Addicted Charter Member Joined: Jun/29/2007 Location: East Tennessee Status: Offline Points: 5477 |
Post Options
Thanks(0)
|
Like you said, it's like a Chinese puzzle. It comes out with some work and goes back in with some work. Remember, it goes back in two different ways (upside down and right side up), be sure to mark the top because if you install it upside down, you can't get the column back together. You'll have to tear it back apart.
|
|
CamJam
Moderator Group Joined: Jan/04/2014 Location: Arizona Status: Offline Points: 6549 |
Post Options
Thanks(0)
|
Thanks for that tip! Might have saved me a bunch of time!! |
|
'73 Javelin 360 (current project)
'72 Baja Bronze Javelin SST '69 Big Bad Orange AMX (2018 Teague Heritage Award) SOLD |
|
CamJam
Moderator Group Joined: Jan/04/2014 Location: Arizona Status: Offline Points: 6549 |
Post Options
Thanks(0)
|
Success! Don't know quite how I got that last collar out (or worse, how I'll get it back in) but it will be good to get this dirty old column blasted, painted, lubed and fit new bearings to it. It really was an eye sore before when you opened the hood.
Thanks to everyone who helped!
|
|
'73 Javelin 360 (current project)
'72 Baja Bronze Javelin SST '69 Big Bad Orange AMX (2018 Teague Heritage Award) SOLD |
|
LincolnHudson
AMC Fan Joined: Sep/11/2019 Location: Huntsville AL Status: Offline Points: 2 |
Post Options
Thanks(0)
|
Any advice and help to replace the bearing in the tube assembly?I don’t mean the upper or lower bearings I mean the plastic she did holes a little ball bearings in between the two parts of the housing
|
|
Post Reply | Page <123 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |