Your donations help keep this valuable resource free and growing. Thank you.
|
401 pressure plate bolts |
Post Reply |
Author | |
iapexl8r
AMC Addicted Joined: Apr/13/2008 Location: north idaho Status: Offline Points: 639 |
Post Options
Thanks(0)
Posted: Jan/14/2015 at 7:14pm |
Hey guys any one have a cross reference on 401 pressure plate/clutch bolts they are 3/8-16 and should be shoulderd and about 1" ARP does not not list AMC clutch bolts. thank you.
Chris
|
|
The Flying Clutchman
AMC Apprentice Joined: Jul/05/2012 Location: Durham, NC Status: Offline Points: 245 |
Post Options
Thanks(0)
|
American Parts Depot carries them.
|
|
1969 BBO AMX
1970 Torino Squire 1971 Chevelle SS 1980 turbo Pinto wagon |
|
needafasterAMX
AMC Addicted Joined: Feb/20/2008 Location: TLH,Florida Status: Offline Points: 724 |
Post Options
Thanks(0)
|
take your pick, Most plates are the same as chevy, the disk is different 10 spline
http://www.summitracing.com/search/part-type/pressure-plate-fasteners/thread-size/3-8-16-in/underhead-length-in/1-000-in?N=4294909335%2B4294950687%2B4294909423&SortBy=Default&SortOrder=Ascending&tw=press&sw=Pressure%20Plate%20Fasteners Edited by needafasterAMX - Jan/15/2015 at 3:03pm |
|
74 AMX, 401
Viper spec T56 6 speed trans Hydroboost brakes with rear disks from a Avenger 3:73 TG rear,now Trutrac with 3:15 A Turbo is in my future. |
|
1970390amx
AMC Addicted Joined: Jul/11/2008 Location: colorado Status: Offline Points: 3312 |
Post Options
Thanks(0)
|
If you are running an 11" disc make sure the bolts have a head no bigger than 1/2" or they will rub on the disc.I have used a grade 8 header bolt in the past, they have a 7/16 head.
|
|
1970 390 4speed Bittersweet shadow mask AMX
1970 Amx missing most everything, or in a box |
|
iapexl8r
AMC Addicted Joined: Apr/13/2008 Location: north idaho Status: Offline Points: 639 |
Post Options
Thanks(0)
|
thanks for all the good info I was looking for something I could p/u at my local speed shop. Well I went there and they had pressure plate bolts for my AMC made by mr gasket.... in stock woo whoo.
|
|
scguy390
Supporter of TheAMCForum Joined: Mar/12/2008 Location: Illinois Status: Offline Points: 160 |
Post Options
Thanks(0)
|
What is the part number? Thanks Bob
|
|
69 SC/Rambler 71 SC360 72 Gremlin < |
|
AMCT
AMC Apprentice Joined: Feb/15/2014 Location: Springboro Pa Status: Offline Points: 123 |
Post Options
Thanks(0)
|
Since I am very cost conscious I would go to the local bolt place and purchas 3/8 16x1" grade 8 bolts. Good american made and $.50 each instead of $2.00 or more each. Just my $.02 worth. Be sure to use lock washers.
|
|
Dirt is for racing asphalt is for getting there.
|
|
iapexl8r
AMC Addicted Joined: Apr/13/2008 Location: north idaho Status: Offline Points: 639 |
Post Options
Thanks(0)
|
pressure plate bolts are special they have a larger shank that insets in the flywheel. in a stocker probably no issues but in a hi perf aplication cheap could cost you.
mr gasket p/n 910
|
|
1970390amx
AMC Addicted Joined: Jul/11/2008 Location: colorado Status: Offline Points: 3312 |
Post Options
Thanks(0)
|
as I said before if you are running a 11' disk you will not be happy with those bolts.
|
|
1970 390 4speed Bittersweet shadow mask AMX
1970 Amx missing most everything, or in a box |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |