Your donations help keep this valuable resource free and growing. Thank you.
|
1970 390 flexplate |
Post Reply | Page 12> |
Author | |
RedX
AMC Fan Joined: Jan/31/2011 Location: Alliance NE Status: Offline Points: 8 |
Post Options
Thanks(0)
Posted: May/05/2012 at 10:13am |
poormansMachine posted a photo of a 70/390/Borg Warner flexplate on Jun/03/2008. That photo has been moved or deleted and now I need to compare it to my flexplate. Is there a way to retreive that photo? My torque converter to flexplate nuts have come loose several times and i just replaced the nuts with new ones. The stud holes in the flexplate have elongated (egged?). Can I have the holes redrilled in a different location without affecting the balance? Thanks. This forum is female caninein'. I have learn so much from it. I' believe restoring an AMX would not be possible without the AMC Forum and e-Bay. Thanks for any help you can provide.
|
|
1970390amx
AMC Addicted Joined: Jul/11/2008 Location: colorado Status: Offline Points: 3314 |
Post Options
Thanks(0)
|
I dont see a problem with having the holes redrilled in a different location. As long as no weights are removed and nothing intefers with any weights.
|
|
1970 390 4speed Bittersweet shadow mask AMX
1970 Amx missing most everything, or in a box |
|
FuzzFace2
AMC Addicted Joined: Jul/05/2007 Location: Angier, N.C. Status: Offline Points: 10356 |
Post Options
Thanks(0)
|
^^^x2 what he said^^^
I would also use blue loctite on the nuts this time around.
Dave ----
|
|
TSM = Technical Service Manual
75 Gremlin X v8 for sale 70 Javelin 360/auto drag car 70 Javelin 360/T5 Street car |
|
sidewinder
Moderator Group Joined: Oct/07/2007 Location: Niagara Falls, Status: Offline Points: 6665 |
Post Options
Thanks(0)
|
If the pics were posted from a remote host ( photobucket) and they are deleted or moved from there they won't show up here on the forum. I don't think the forum had the ability to host pictures in 2008.
Chuck Page |
|
Chuck Page ,AKA Sidewinder
1968 "BLACK CHERRY" Javelin Previous owner of 2013 Heritage Cup winner 1970 BBO AMX |
|
amx39068
Supporter of TheAMCForum Joined: Feb/21/2008 Location: Arizona Status: Offline Points: 11576 |
Post Options
Thanks(0)
|
This is incorrect. The offset weight is relative to the index of the bolt holes (one is off center from the other 5) so drilling the bolt holes in a different location will move the flex plate weight to an amount equal to the offset of the new holes and create an out of balance condition. The 6th bolt hole is offset specifically to ensure that the weigth on the flywheel is in one location only relative the counter weights on the crankshaft. Will333 discovered his car had the wrong harmonic balancer offset weight on his 68 390 and it caused a vibration that was resolved by putting the correct balancer on his engine. The same would hold true if you move the bolt holes on the flex plate. |
|
Dan Curtis-Owner and CEO AZ AMC Restorations; Facebook: https://www.facebook.com/amcmusclecars/ & Curtis Real Estate Development
|
|
whizkidder
Supporter of TheAMCForum Joined: Mar/03/2008 Location: North Georgia Status: Offline Points: 2972 |
Post Options
Thanks(1)
|
I don't think he's changing the orientation of the plate to the crank -- he's changing the orientation of the converter to the plate. If the converter is neutral balanced it shouldn't matter.
|
|
Ron Frost
marne1ancient @ gmail.com 910 nine two two 0563 "There is no limit to what a man can do, so long as he does not care a straw who gets credit for it. Charles Montague |
|
bbgjc
AMC Addicted Joined: Nov/24/2009 Location: No.VA Status: Offline Points: 1660 |
Post Options
Thanks(0)
|
You could also weld the elongated part closed. A little welding wire, a little grinding and you're done. Probably quicker than drilling new holes, which would have to be correctly/exactly spaced or the flex plate will be out of true and will cause all kinds of issues.
|
|
390spirit
AMC Addicted Joined: Jun/28/2008 Location: U.S.A. Status: Offline Points: 1849 |
Post Options
Thanks(0)
|
i took a F/P that was intended to be used with a 727 and drilled holes to make a TH400 converter fit it and mounted it to my 70 390 and it has worked great for 2 years now.
Yes it can be done! |
|
RedX
AMC Fan Joined: Jan/31/2011 Location: Alliance NE Status: Offline Points: 8 |
Post Options
Thanks(0)
|
Thanks everyone. I thought drilling was possible. Didn't think about welding. Could use a copper or brass 3/8" rod to protect the "good part" of the hole during the welding process. I installed the new nuts with the blue loctite. Will try that first before pulling tranny. Wish me luck.
|
|
amx39068
Supporter of TheAMCForum Joined: Feb/21/2008 Location: Arizona Status: Offline Points: 11576 |
Post Options
Thanks(0)
|
Upon rereading the OPs original posting, I stand corrected but I would imagine getting the stud holes properly lined up so the converter is positioned perfectly from center will be a real PITA plus you would wan to drill the new stud holes equidistant from the old ones in either direction so as to not cause any extra stress points that might crack if the new holes are too close to the old holes. |
|
Dan Curtis-Owner and CEO AZ AMC Restorations; Facebook: https://www.facebook.com/amcmusclecars/ & Curtis Real Estate Development
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |