Your donations help keep this valuable resource free and growing. Thank you.
|
Amx Quarter |
Post Reply | Page <12 |
Author | |
69BBB3904spAMX
AMC Addicted Charter Member Joined: Jun/29/2007 Location: San Jose, CA Status: Offline Points: 2761 |
Post Options
Thanks(0)
|
Save those pillar post pieces, the s.s. pieces behind the quarter windows, the roof, etc. I've previously sold all these parts to members that needed these parts
|
|
37 Ford Tudor 60 hp V8 flathead, all original, never restored
69BBB3904spAMX 70 Camaro 1st car 74 Hornet Hatch 6 cyl floor/auto 2007,2008,2009 PT Cruisers Aluminum Deck Car Trailer |
|
Green AMX
AMC Addicted Joined: Feb/16/2012 Location: Florida Status: Offline Points: 521 |
Post Options
Thanks(0)
|
Use a spot weld cutter, strip off the paint at all the factory seams it will make it easy to see the spot welds, center punch or use a 1/8 drill to leave a small dimple in the center of each weld then cut with the spot weld cutter use a slow speed and stay square. Some tool vendors have a hardened flat bar that can be tapped with a hammer thru the seam after you drill out the spot welds to help separate the panels. You also may find some spot that are brazed you will need to cut with a cut off wheel.
|
|
69 AMX 390 4speed go pack
72 Javelin 360 auto(sons) 82 Spirit (wife's 1st car)still not done |
|
348AMX
AMC Addicted Joined: Jul/03/2007 Location: Massachusetts Status: Offline Points: 4165 |
Post Options
Thanks(0)
|
How much did that rear clip set you back?? Do you still have the passenger rear quarter section?
Edited by 348AMX - Oct/13/2012 at 12:24pm |
|
AmcKidd
AMC Addicted Charter Member Joined: Jun/29/2007 Location: Oroville, Ca Status: Offline Points: 809 |
Post Options
Thanks(0)
|
passenger side is what i needed, along with the tail panel
|
|
Oroville, Ca
|
|
348AMX
AMC Addicted Joined: Jul/03/2007 Location: Massachusetts Status: Offline Points: 4165 |
Post Options
Thanks(0)
|
No worries man thanks.
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |