Your donations help keep this valuable resource free and growing. Thank you.
|
One piece axels for a SC/Rambler |
Post Reply |
Author | |
bbojav
AMC Apprentice Joined: Apr/06/2008 Location: Rochester, MN 5 Status: Offline Points: 41 |
Post Options
Thanks(0)
Posted: Mar/30/2012 at 1:07pm |
Just reading some posts about one piece axels it sounds like the old two piece axels must be sent in for measurements. Is this true in all cases or can you by axels specific to the car? Thanks in advance Ed |
|
http://theamcforum.com/forum/uploads/769/th_CopyofphpVd9Cek_c2PM.jpg1969 SC/Rambler 34 Plymouth Streetrod 06 Daytona Charger
|
|
whizkidder
Supporter of TheAMCForum Joined: Mar/03/2008 Location: North Georgia Status: Offline Points: 2972 |
Post Options
Thanks(0)
|
Due to the many variations from the factory on AMC 20 axles/housings/track width/etc., and the potential that the housings have been swapped around over the past 40 years, Moser wants your axles to ensure they send you the right ones. I don't believe they will allow you to measure yours, either.
|
|
Ron Frost
marne1ancient @ gmail.com 910 nine two two 0563 "There is no limit to what a man can do, so long as he does not care a straw who gets credit for it. Charles Montague |
|
wcamp70
AMC Nut Joined: Dec/04/2009 Location: Kennesaw, GA Status: Offline Points: 370 |
Post Options
Thanks(0)
|
I had to send them mine. No problems and quick turnaround time.
|
|
bbojav
AMC Apprentice Joined: Apr/06/2008 Location: Rochester, MN 5 Status: Offline Points: 41 |
Post Options
Thanks(0)
|
Thanks for your comments on the axels. Mine are being sent to Moser tommorro
|
|
http://theamcforum.com/forum/uploads/769/th_CopyofphpVd9Cek_c2PM.jpg1969 SC/Rambler 34 Plymouth Streetrod 06 Daytona Charger
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |