Your donations help keep this valuable resource free and growing. Thank you.
|
My 401 gremlin build |
Post Reply | Page <1234 6> |
Author | |
Stormogdis
AMC Addicted Joined: Sep/04/2017 Location: Norway Status: Offline Points: 612 |
Post Options
Thanks(0)
|
ARP headbolts arrived
|
|
Stormogdis
AMC Addicted Joined: Sep/04/2017 Location: Norway Status: Offline Points: 612 |
Post Options
Thanks(0)
|
Looking at this kit for the engine,
|
|
Stormogdis
AMC Addicted Joined: Sep/04/2017 Location: Norway Status: Offline Points: 612 |
Post Options
Thanks(1)
|
And it's home
|
|
PAGAENT
AMC Apprentice Joined: Jan/16/2020 Location: 93446 Status: Offline Points: 140 |
Post Options
Thanks(0)
|
I see the broken piston top in your last picture. I just took apart a 390 block with 401 crank and there was a piston just like it. The dish depth & valve relief makes the distance to the bottom of the ring groove inadequate. Check out your next pistons carefully. Pat
|
|
Pat Gary
|
|
Stormogdis
AMC Addicted Joined: Sep/04/2017 Location: Norway Status: Offline Points: 612 |
Post Options
Thanks(0)
|
I will get some help on this build, a good local builder. I will run this cam: https://www.herbertcams.com/500-500-lift-225-235-dur-050-112-lobe-center-33737/ This pistons: And i guess i will find a edelbrock air gap intakte, if not i will run the offenhauser i got with the engine
|
|
Stormogdis
AMC Addicted Joined: Sep/04/2017 Location: Norway Status: Offline Points: 612 |
Post Options
Thanks(0)
|
Got the AMC 20 home yesterday.
|
|
Stormogdis
AMC Addicted Joined: Sep/04/2017 Location: Norway Status: Offline Points: 612 |
Post Options
Thanks(0)
|
The 904 in the gremlin right now only have 1 gear, so i pulled it and started to swap in a 727, That way i can get the car to inspection and get an idea of how much i need to do before i can drive it legal
Still collecting parts for the 401 build. |
|
Stormogdis
AMC Addicted Joined: Sep/04/2017 Location: Norway Status: Offline Points: 612 |
Post Options
Thanks(0)
|
Got the 727 in the car today.
Will need a shorter driveshaft
|
|
Stormogdis
AMC Addicted Joined: Sep/04/2017 Location: Norway Status: Offline Points: 612 |
Post Options
Thanks(0)
|
Then i found out the main bearings was missing in the shippment Edit: Edited by Stormogdis - Nov/05/2020 at 4:29pm |
|
Stormogdis
AMC Addicted Joined: Sep/04/2017 Location: Norway Status: Offline Points: 612 |
Post Options
Thanks(1)
|
Most inportent part came today
|
|
Post Reply | Page <1234 6> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |