Your donations help keep this valuable resource free and growing. Thank you.
|
"New Pertronix Ignitor III Done" |
Post Reply | Page <1 4567> |
Author | |
amx39068
Supporter of TheAMCForum Joined: Feb/21/2008 Location: Arizona Status: Offline Points: 11576 |
Post Options
Thanks(0)
|
The one I have is ribbed accross the entire top of the Air Cleaner lid with allen head screws all the way around the outside. I really like the way it looks a lot and will hopefully get a picture up within the next couple of days.
BTW, it matches up very nicely with a polished and finned rear differential cover I also have not yet installed but I suppose the only person who would probably have a chance to enjoy both at relatively the same time would be some poor slob I run over while running around without the hood on! Edited by amx39068 - May/05/2009 at 11:49pm |
|
Dan Curtis-Owner and CEO AZ AMC Restorations; Facebook: https://www.facebook.com/amcmusclecars/ & Curtis Real Estate Development
|
|
TorqueyAMX
AMC Addicted Joined: Dec/16/2008 Location: Simi Valley CA Status: Offline Points: 1139 |
Post Options
Thanks(0)
|
I use the O'Brien Truckers no name finned air cleaners on dual quads setups. 354 Early Hemi and 425 Buick Nailhead.
Edited by TorqueyAMX - May/06/2009 at 12:11am |
|
|
|
PHAT69AMX
AMC Addicted Joined: Jul/07/2007 Location: West Virginia Status: Offline Points: 5904 |
Post Options
Thanks(0)
|
Helping someone choose an ignition upgrade, always come back to this thread
and all the detailed information TourqueyAMX so graciously provided.
Thought while here I'd ad this picture showing AMC & Chevy Point Plate shape differences,
between AMC and Chevy the Points and Condensor are on opposite sides of the Point Plate.
Edited by PHAT69AMX - Jul/09/2011 at 1:10am |
|
RB401
AMC Apprentice Joined: Jul/08/2007 Location: United States Status: Offline Points: 232 |
Post Options
Thanks(0)
|
Just curious, but how does the Ignitor III compare to an MSD 6 or other CD style ignition. I would assume that the CD box has the cabability of providing much more spark energy which, if needed, would provide for a smoother idle, better accelleration, etc.
My car has a uniform compression of about 175-180 psi per cylinder, but nevertheless a few cylinders have oily plugs. I picked up an MSD 6 and MSD distributor a few years ago on EBAY assuming I would likely need the spark energy. Never had any problems with these MSD parts and the car runs fine. But, if I can get rid of the MSD box and wiring and run a Pertronix distributor with the Ignitor III with no loss of performance, I would be inclined to do it. Any thoughts?
|
|
'73 Javelin AMX, 401, T5
T5 Swap Page: http://mysite.verizon.net/amxjavelin/t5swap/t5swap.html |
|
PHAT69AMX
AMC Addicted Joined: Jul/07/2007 Location: West Virginia Status: Offline Points: 5904 |
Post Options
Thanks(0)
|
Back there somewhere in this thread Tourquey typed about during PerTronix III development
that they had a 350 Chev on a Dyno with a full MSD set-up, did a baseline pull,
then removed all MSD stuff, PerTronix III installed, picked up 10 HP it says......
|
|
348AMX
AMC Addicted Joined: Jul/03/2007 Location: Massachusetts Status: Offline Points: 4165 |
Post Options
Thanks(0)
|
Bumping this up since it seems like there are a few installs of pertronix right now that people could use help with and reference this info.
|
|
hoosieramc
AMC Addicted Joined: Jul/03/2007 Location: Indiana Status: Offline Points: 1233 |
Post Options
Thanks(0)
|
So will the Igniter three work with the factory tachometer in a 69 AMX?
|
|
|
|
waltl
AMC Apprentice Joined: Sep/07/2012 Location: illinois Status: Offline Points: 131 |
Post Options
Thanks(0)
|
My factory tach quit working after Ignighter III install. 1970 Javelin.
Walt |
|
Walt L.
|
|
scguy390
Supporter of TheAMCForum Joined: Mar/12/2008 Location: Illinois Status: Offline Points: 160 |
Post Options
Thanks(0)
|
When I installed the Igniter III in my 1969 SC/Rambler and my 1971 SC360, the tach in both cars needed to be replaced.
Haven't had any problems with either car after installing the Igniter III. The IgniterIII has been in the SC/R for 12 years with no problems.
|
|
69 SC/Rambler 71 SC360 72 Gremlin < |
|
8ton
AMC Apprentice Joined: Feb/21/2017 Location: Central VA Status: Offline Points: 34 |
Post Options
Thanks(0)
|
Are all of the Igniter III Delco units compatible with the AMC now? Or do we still need to pay the premium of ordering directly from Pertronix?
|
|
Post Reply | Page <1 4567> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |