Your donations help keep this valuable resource free and growing. Thank you.
|
Flywheel bolts |
Post Reply |
Author | |
68-73 amx
AMC Addicted Joined: Jun/14/2012 Location: Pa. Status: Offline Points: 533 |
Post Options
Thanks(0)
Posted: Oct/09/2019 at 10:23pm |
My flywheel bolts are too long , could I use the star shaped spacer from a auto flex plate to give the bolts clearance ? Or just buy new 1/2 ARP long bolts ?
|
|
Steve_P
AMC Addicted Charter Member Joined: Jun/28/2007 Status: Offline Points: 3760 |
Post Options
Thanks(0)
|
Don't use a spacer- the hub on the clutch disk uses that space. Get the correct bolts. Pontiac bolts are slightly longer than AMC but will work.
|
|
amcenthusiast
AMC Addicted Joined: Jul/02/2012 Location: SW Atlanta GA Status: Offline Points: 1778 |
Post Options
Thanks(0)
|
Get familiar with all our AMC-specific vendors who are knowingly committed to 'going the extra mile' for all us other AMCers who need to buy correct parts for our less popular but otherwise excellent cars.
-see 'vendors' section right here on AMC Forum -ever seen 'Alan Flemming's Home Page'? http://www.science.uwaterloo.ca/~afleming/ Edited by amcenthusiast - Oct/10/2019 at 11:24am |
|
443 XRV8 Gremlin YouTube video: https://www.youtube.com/watch?reload=9&v=2DmFOKRuzUc
XRV8 Race Parts website: http://amcramblermarlin.1colony.com/ |
|
68-73 amx
AMC Addicted Joined: Jun/14/2012 Location: Pa. Status: Offline Points: 533 |
Post Options
Thanks(0)
|
Today I found out my Hayes flywheel is almost 3/16 thinner at the bolt flange vs stock that is why 1 inch bolts slightly hit block .Jeep 4.0 bolts are 7/8 ordered a set today.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |