Your donations help keep this valuable resource free and growing. Thank you.
|
1959 Rambler Super |
Post Reply |
Author | |
FlashSuper59
AMC Fan Joined: Jun/12/2019 Location: 60012 USA Status: Offline Points: 2 |
Post Options
Thanks(0)
Posted: Jun/12/2019 at 10:58am |
is there a way around having to sleeve wheel cylinders on this car?
different wheel cylinders? different brakes? from another model? Why are rear cylinders different from front cylinders? new guy here, Flash Super (Sarge Mark) in Chicago suburb |
|
tomj
AMC Addicted Joined: Jan/27/2010 Location: earth Status: Offline Points: 7544 |
Post Options
Thanks(0)
|
AMC (and all makes, really) balance front/rear braking force by selecting wheel cylinder diameter. you'd need to read about the basics of hydraulic brakes, and do a tiny bit of math, but it's worth it. front brakes do most of the work due to the way mass shifts around. most force is there, larger wheel cyls. also left and right are often different parts -- same bore, but different casting, outlet pointing left/right. how good/willing are you at modifications? later AMC drums brakes bolt in (i used '75 Gremlin) but Scarebird sells a disc kit for the front. if your car is "original" you will likely find all of the rubber hoses, steel lines, etc, all need replacing. can't you just buy new wheel cylinders? rockauto.com? i haven't tried lately... be prepared to replace all brake parts and deal with wear in the backing plates and the rest. it's ooooooold..... |
|
1960 Rambler Super two-door wagon, OHV auto
1961 Roadster American, 195.6 OHV, T5 http://www.ramblerLore.com |
|
farna
Supporter of TheAMCForum Moderator Lost Dealership Project Joined: Jul/08/2007 Location: South Carolina Status: Offline Points: 19676 |
Post Options
Thanks(0)
|
You should be able to find wheel cylinders. Check Rockauto.com as TomJ suggested. I nothing there check with Galvin's (www.ramblerparts.com), Rare Parts (www.rareparts.com), or Kanter (www.kanter.com). Rare Parts are probably the highest cost. Depending on costs and how much you're committed to keeping it original, you might want to consider later model brakes or something like the standard Scarebird disc brake kit (https://scarebird.com/index.php?route=product/product&path=95&product_id=55). Says 64-73. but fits AMC/Rambler/Nash cars back to at least 1952. They haven't test fit them on earlier cars, but Tom and I have! You can use the existing master cylinder, but it would be better to upgrade to a mid 70s Hornet master. On the little American (58-63) manual disc brakes work fine, no need for power if you're okay with the manual brakes on it now.
|
|
Frank Swygert
|
|
tomj
AMC Addicted Joined: Jan/27/2010 Location: earth Status: Offline Points: 7544 |
Post Options
Thanks(0)
|
andy has a scarebird kit on his '58 american. it's true, the car is so small and light no need for power. (in my opinion, power-anything would be a terrible match for that small car; AMC went to some effort to make everything amazingly low-force to operate; easiest steering ever! |
|
1960 Rambler Super two-door wagon, OHV auto
1961 Roadster American, 195.6 OHV, T5 http://www.ramblerLore.com |
|
SuperWagon
AMC Apprentice Joined: Dec/17/2012 Location: Chicago Suburbs Status: Offline Points: 174 |
Post Options
Thanks(0)
|
It took me a while to find rears for my 58. No one carries them. I bought them from an AMC place in CA I think. Had to send my old ones as cores. Had perfect brakes ever since.
|
|
1958 Rambler Cross Country Super wagon. 196ci cast iron engine with 3 speed manual
|
|
SuperWagon
AMC Apprentice Joined: Dec/17/2012 Location: Chicago Suburbs Status: Offline Points: 174 |
Post Options
Thanks(0)
|
Here is my old thread. I have a 58 Rambler Cross Country wagon I got my parts from Galvins
|
|
1958 Rambler Cross Country Super wagon. 196ci cast iron engine with 3 speed manual
|
|
tomj
AMC Addicted Joined: Jan/27/2010 Location: earth Status: Offline Points: 7544 |
Post Options
Thanks(0)
|
i had no idea single-piston wheel cylinders even existed! wow. though pricey, you can have even rotted cylinders re-sleeved in stainless steel. then they last forever. C H Topping, though their website implies they're behind the times http://www.chtopping.com/ they are actually top-notch brake specialists. in Long Beach CA. then know everything and can do anything (lol) (close to true as anywhere i've ever been). |
|
1960 Rambler Super two-door wagon, OHV auto
1961 Roadster American, 195.6 OHV, T5 http://www.ramblerLore.com |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |