Your donations help keep this valuable resource free and growing. Thank you.
|
Flex Plate ID |
Post Reply | Page 123 10> |
Author | |
poormansMACHINE
AMC Addicted Charter Member Joined: Jun/28/2007 Location: Shoemaker-Levy9 Status: Offline Points: 12302 |
Post Options
Thanks(0)
Posted: Jun/03/2008 at 10:17pm |
70/390 Borg Warner (by XJ-001)
71/401 Borg Warner (by pmm) Edited by poormansMACHINE - Jun/10/2008 at 11:33pm |
|
Peter Marano
Supporter of TheAMCForum Joined: Jul/01/2007 Location: Kenosha WI Status: Offline Points: 1650 |
Post Options
Thanks(0)
|
1968/69 390 or 1970 390?
|
|
poormansMACHINE
AMC Addicted Charter Member Joined: Jun/28/2007 Location: Shoemaker-Levy9 Status: Offline Points: 12302 |
Post Options
Thanks(0)
|
It's a 70. Forgot to post the year. |
|
PHAT69AMX
AMC Addicted Joined: Jul/07/2007 Location: West Virginia Status: Offline Points: 5919 |
Post Options
Thanks(0)
|
1973 401 TorqueFlite 727 - 1972 part #321 4090 (by phat69amx)
The (4) non-stock larger converter mounting holes inboard of the smaller stock holes were added for mounting an aftermarket B&M #60425 10" SuperHoleShot converter. Picture is of the Transmission side so the balance weight is visible. Above Borg-Warner Flexplate pictures appear to be of the Engine Side with the balance weights visible, so it appears balance weights were located on different sides of the flexplate between BW and TF ? Edited by PHAT69AMX - Oct/27/2015 at 7:44am |
|
PHAT69AMX
AMC Addicted Joined: Jul/07/2007 Location: West Virginia Status: Offline Points: 5919 |
Post Options
Thanks(0)
|
Should there be a "standard positioning" for taking the pictures ?
Like in the first picture of the '70 390 BW it has a converter hole labeled "12 o'clock" and
located at the top of the picture and the offset crank flange hole labeled and at the bottom.
|
|
billd
Moderator Group Forum Administrator Joined: Jun/27/2007 Location: Iowa Status: Offline Points: 30894 |
Post Options
Thanks(0)
|
I like that idea............. if nothing else, rotate the image using your favorite image editor.
There's always an indexing hole (two closer) so if those were always at the same clock position......
|
|
PHAT69AMX
AMC Addicted Joined: Jul/07/2007 Location: West Virginia Status: Offline Points: 5919 |
Post Options
Thanks(0)
|
1969 343 Borg-Warner M-11 - part #318 1750 (by phat69amx) Edited by PHAT69AMX - Oct/27/2015 at 7:17am |
|
PHAT69AMX
AMC Addicted Joined: Jul/07/2007 Location: West Virginia Status: Offline Points: 5919 |
Post Options
Thanks(1)
|
AMC Flexplate Part Numbers from 1967 thru 1972 Parts Catalog F-14072 R3
Group 16.035-1 PLATE, Automatic Transmission Converter Drive
67/71 ... SIX ..................... 319 1958
72 ...... SIX ..................... 321 4087
67/69 ... 290 (Except 30) ......... 318 4502
68/69 ... 290 (30) ................ 319 2342
70/71 ... 304 ..................... 319 6876
72 ...... 304 ..................... 321 4088
67/69 ... 343 ..................... 318 1750
70/71 ... 360 ..................... 319 6874
72 ...... 360 ..................... 321 4089
68/69 ... 390 ..................... 319 1125
70 ...... 390 (E/MACHINE) ......... 319 6874
70 ...... 390 (MACHINE-* 16-37) ... 319 6874
70 ...... 390 (MACHINE-* 16-38) ... 321 0063
71 ...... 401 ..................... 321 2351
72 ...... 401 ..................... 321 4090
16-37 ..... On 1970 (390) used prior to Engine Build Code Number 210Y10
.................... and beginning with Engine Build Code Number 212Y10
16-38 On 1970 (390) used beginning with Engine Build Code Number 210Y10
.......................... and prior to Engine Build Code Number 212Y10 Edited by PHAT69AMX - Jun/13/2008 at 2:38pm |
|
poormansMACHINE
AMC Addicted Charter Member Joined: Jun/28/2007 Location: Shoemaker-Levy9 Status: Offline Points: 12302 |
Post Options
Thanks(0)
|
Thought about it, but decided it's like a where's Waldo. |
|
Rebel68343
AMC Apprentice Joined: Oct/14/2008 Location: CA Status: Offline Points: 42 |
Post Options
Thanks(0)
|
Thanks for the 343 ID...
|
|
Post Reply | Page 123 10> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |