Your donations help keep this valuable resource free and growing. Thank you.
|
Cal Tracs for Americans/Rogues/SCRamblers/AMX/Jav |
Post Reply | Page <1 2345> |
Author | |
tomslik
AMC Addicted Joined: Mar/07/2008 Location: Colorado Status: Offline Points: 680 |
Post Options
Thanks(0)
|
so, where's this deal at?
dead in the water or?
|
|
67 american 290/4speed |
|
amx39068
Supporter of TheAMCForum Joined: Feb/21/2008 Location: Arizona Status: Offline Points: 11576 |
Post Options
Thanks(0)
|
So far only one person has sent in the spec sheet. This has kind of been like herding cats.
Guys, Any of you who want to take advantage of this opportunity won't be able to do so unless you download and fill out the spec sheet because if they are wrong and not what you wanted, you own them if you did not perform CalTrac's requested due diligence to verify the eyelet to eyelet distance and springs width currently on your cars. |
|
Dan Curtis-Owner and CEO AZ AMC Restorations; Facebook: https://www.facebook.com/amcmusclecars/ & Curtis Real Estate Development
|
|
Rebel Machine
AMC Addicted Joined: Jul/03/2007 Location: Western Il Status: Offline Points: 5121 |
Post Options
Thanks(0)
|
I've bought two sets of Cal-Tracs.
The first set went on my old '73 Gremlin. The 'U' bolt hole spacing was wrong, had to modify it. Also the shock mounts weren't even close, had to cut and weld the factory plates to the Cal-Trac plate. No problems with the spring eye.
The next set was for my '69 AMX. Again the 'U' bolt spacing needed to be modified but everything else fit.
-Steve-
|
|
tomslik
AMC Addicted Joined: Mar/07/2008 Location: Colorado Status: Offline Points: 680 |
Post Options
Thanks(0)
|
hey, MY spec sheet has been filled out since i posted the links but nothing was posted on what to do with them...
it's still hanging right in front of me;)
|
|
67 american 290/4speed |
|
amx39068
Supporter of TheAMCForum Joined: Feb/21/2008 Location: Arizona Status: Offline Points: 11576 |
Post Options
Thanks(0)
|
Here's the spec sheet URL.
Please fill it out, scan and email to me at d_curtis@q.com so I can place orders...thanks. Once I have the spec sheets in hand, I will place the order and make arrangements, get a final price and hopefully get them drop shipped directly to each of you. Caltracs auto spec sheet |
|
Dan Curtis-Owner and CEO AZ AMC Restorations; Facebook: https://www.facebook.com/amcmusclecars/ & Curtis Real Estate Development
|
|
amx39068
Supporter of TheAMCForum Joined: Feb/21/2008 Location: Arizona Status: Offline Points: 11576 |
Post Options
Thanks(0)
|
The ones for the SC/Rumbler fit perfectly right out of the box. After installing them, I removed the extra leaf in both rear springs to drop the rear height back down a bit. Edited by amx39068 - May/13/2012 at 8:45pm |
|
Dan Curtis-Owner and CEO AZ AMC Restorations; Facebook: https://www.facebook.com/amcmusclecars/ & Curtis Real Estate Development
|
|
tomslik
AMC Addicted Joined: Mar/07/2008 Location: Colorado Status: Offline Points: 680 |
Post Options
Thanks(0)
|
Well?
|
|
67 american 290/4speed |
|
amx39068
Supporter of TheAMCForum Joined: Feb/21/2008 Location: Arizona Status: Offline Points: 11576 |
Post Options
Thanks(0)
|
Only two or three people actually followed through with specific details of their request and at that rate, my discount would only be 10% which doesn't seem to be worth the effort with the higher shipping costs.
Maybe I should just order 10 sets (5 AMX/Jav and 5 American/Rogue) and just sell them when people ask for them over time . I was really hoping we could get 10 folks lined up with a firm comittment so everyone would end up with a full 20+% discount. Edited by amx39068 - Jul/07/2012 at 8:31am |
|
Dan Curtis-Owner and CEO AZ AMC Restorations; Facebook: https://www.facebook.com/amcmusclecars/ & Curtis Real Estate Development
|
|
tomslik
AMC Addicted Joined: Mar/07/2008 Location: Colorado Status: Offline Points: 680 |
Post Options
Thanks(0)
|
maybe it would help if we knew the bottom line?
btw, i DID email you my info sheet, didn't I?
|
|
67 american 290/4speed |
|
amx39068
Supporter of TheAMCForum Joined: Feb/21/2008 Location: Arizona Status: Offline Points: 11576 |
Post Options
Thanks(0)
|
As stated earlier, the bottom line is between 20% and 25% discount but I won't know exact numbers until I place the orders and get the shipping quote to determine if they will drop ship or have to ship them bulk to me. I expect the total discount on the Caltracs to be around 23-25% including shipping and the springs and shocks to be around 12-15% discounts including shipping.
And yes Tom, you are the only one that sent the spec sheet and IIRC correctly I responded that without additional firm committments from others, you might as well just go ahead and order them on your own as the discount doesn't start until I get to 3 or more and then it is only 10% until I get the next clip levels of 5, 8 and 10 with 10 or more being the max discount. |
|
Dan Curtis-Owner and CEO AZ AMC Restorations; Facebook: https://www.facebook.com/amcmusclecars/ & Curtis Real Estate Development
|
|
Post Reply | Page <1 2345> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |