Your donations help keep this valuable resource free and growing. Thank you.
|
AMC to Ford Oil Filter Adapter |
Post Reply | Page 12> |
Author | |
smills61074
AMC Nut Joined: Feb/05/2011 Location: savanna, il Status: Offline Points: 270 |
Post Options
Thanks(0)
Posted: Jul/08/2018 at 9:50pm |
Do any of the vendors make an adapter to switch from an AMC oil filter to a Ford or Dodge oil filter? Different thread size.
|
|
68 Blue AMX Perfect California Body going for 401/6 speed
1 1/4 ton Power Wagon Ex Colorado Brush Truck 2006 Caddy CTS V with LS2 and manual trans Corsa Exhaust Beater car (daily driver) |
|
Ken_Parkman
AMC Addicted Joined: Jun/04/2009 Location: Ontario Status: Offline Points: 1814 |
Post Options
Thanks(0)
|
Factory piece.
After Chrysler took over they changed the AMC's to take the Ford/Mopar filter. The 4.0's use the same adapter. I don't have the pn here but it was available at the local Mopar dealer last time I looked, which admittedly was a while ago.
|
|
vinny
Supporter of TheAMCForum Joined: Jan/05/2012 Location: Calgary Status: Offline Points: 2837 |
Post Options
Thanks(0)
|
https://www.amazon.com/gp/product/B007NQA6KI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
P/N 53007563AB Taken from another post. I assume it is correct.
|
|
390ina71jav
AMC Apprentice Joined: Feb/09/2017 Location: Connecticut Status: Offline Points: 58 |
Post Options
Thanks(0)
|
PN #53007563AB is correct. Just bought one and installed it. Am using a Motorcraft FL-1A filter
|
|
vinny
Supporter of TheAMCForum Joined: Jan/05/2012 Location: Calgary Status: Offline Points: 2837 |
Post Options
Thanks(0)
|
I have no reason to install that adapter. The Purolator L30005 works well for me but each to his own.
|
|
bigbad69
Supporter of TheAMCForum Joined: Jul/02/2007 Location: Ottawa, Ont. Status: Offline Points: 6668 |
Post Options
Thanks(0)
|
Just go to your local pick-a-part and grab one off a 4.0 Jeep. Anything newer than 1991 will work.
|
|
69 Javelin SST BBO 390 T10
|
|
matty 401
AMC Addicted Joined: Jul/06/2007 Location: Iowa Status: Offline Points: 1727 |
Post Options
Thanks(0)
|
why run a ford filter ? because it is longer ? put a NAPA 1049 on it if you want a longer filter and you do not need to change anything filter fits older pontiac has a anti drain back valve in it and is bigger then the NAPA 1258
|
|
72 matador 401 the beast
79 concord 2 door 72 matador 304 grasshopper 68 Rogue 406 93 Cherokee 4.0 5 speed |
|
matty 401
AMC Addicted Joined: Jul/06/2007 Location: Iowa Status: Offline Points: 1727 |
Post Options
Thanks(0)
|
that crosses to a NAPA 1049
|
|
72 matador 401 the beast
79 concord 2 door 72 matador 304 grasshopper 68 Rogue 406 93 Cherokee 4.0 5 speed |
|
Hurst390
AMC Addicted Joined: Apr/20/2008 Location: secret Status: Offline Points: 5818 |
Post Options
Thanks(0)
|
I've ran the 1049 and changed to the ford filter.. The ford filter has instant start up pressure. A definite improvement.
You have to block the oem bypass in the filter housing to run the ford filter. |
|
SC/Hurst Rambler
11.62 120 100% Street Legal |
|
smills61074
AMC Nut Joined: Feb/05/2011 Location: savanna, il Status: Offline Points: 270 |
Post Options
Thanks(0)
|
Any suggestions on blocking bypass?
|
|
68 Blue AMX Perfect California Body going for 401/6 speed
1 1/4 ton Power Wagon Ex Colorado Brush Truck 2006 Caddy CTS V with LS2 and manual trans Corsa Exhaust Beater car (daily driver) |
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |