The AMC Forum : T10 Fork pivot http://theamcforum.com/forum/ This is an XML content feed of; The AMC Forum : Transmission & Drivetrain : T10 Fork pivot Thu, 23 May 2013 02:26:43 +0000 Sat, 07 Apr 2012 22:47:51 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 10.03 360 theamcforum.com/forum/RSS_post_feed.asp?TID=38524 The AMC Forum http://theamcforum.com/forum/http://www.theamcforum.com/forum/skin_images_amc/forumheader.png http://theamcforum.com/forum/ T10 Fork pivot : To start, this is a 72 Gremlin,... http://theamcforum.com/forum/t10-fork-pivot_topic38524_post351796.html#351796 Author: woody
Subject: 38524
Posted: Apr/07/2012 at 10:47pm

To start, this is a 72 Gremlin, 401 4 spd.  Using 73-74 401 with stock V8 bell housing and stock 72 V8 3spd pedal linkage.  The T10 is from 1969 with Hurst Comp. plus shifter.

My fork pivot isn't tall enough for the fork to fully engage.  When I put the pedal down I have adjusted,  the fork hits the back of the fork slot in the 8" tall stock bell housing before the throwout bearing hits the clutch.

I have the correct bearing and fork is installed correctly on the throwout bearing.

It was suggested to me that the pivot ball isn't TALL enough.  I need a different one but what one?  I see several listed on www.amxmgs.com 

Is this what I want?

Throwout Lever Pivot Bolt (1 1/16" Long)

]]> Sat, 07 Apr 2012 22:47:51 +0000 http://theamcforum.com/forum/t10-fork-pivot_topic38524_post351796.html#351796