|
|
|
Your donations help keep this valuable resource free and growing. Thank you.
|
69 AMX race car project |
Post Reply 
|
Page <1 6789> |
| Author | |
RADAMX 
AMC Apprentice 
Joined: Jul/09/2007 Location: Tucson Az. Status: Offline Points: 188 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: Nov/03/2017 at 9:47am |
|
Well after about 5 trips to the track I have decided this Mechanical injection is not going to work in my application .
So EFI here I come . the old system is so rich down low that I could not get the car off the line . So wait till I post picks with 16 injectors still going to use the Bird catcher and tunnel ram and Mechanical pump so it shouldn't be to much work  It has run 152 mph but the ET was bad as a turtle could launch harder than this car does intake picks coming soon. |
|
 |
|
|
RADAMX
AMC Apprentice
Joined: Jul/09/2007 Location: Tucson Az. Status: Offline Points: 188 |
Post Options
Thanks(0)
Quote Reply
Posted: Nov/21/2017 at 9:24am |
|
still need to weld in the bungs no injectors just alignment dowels   |
|
|
|
|
RADAMX
AMC Apprentice
Joined: Jul/09/2007 Location: Tucson Az. Status: Offline Points: 188 |
Post Options
Thanks(0)
Quote Reply
Posted: Dec/21/2017 at 9:50am |
|
getting closer
   |
|
|
|
|
dbomb
AMC Addicted 
Joined: Jul/22/2012 Location: new jersey Status: Offline Points: 705 |
Post Options
Thanks(0)
Quote Reply
Posted: Dec/21/2017 at 11:24am |
|
Sano!
|
|
|
rebuiling 73 amx need parts
|
|
|
|
|
RADAMX
AMC Apprentice
Joined: Jul/09/2007 Location: Tucson Az. Status: Offline Points: 188 |
Post Options
Thanks(0)
Quote Reply
Posted: Jan/04/2018 at 3:46pm |
|
Well it runs with EFI.
Now I just have to tune it   Edited by RADAMX - Jan/04/2018 at 4:19pm |
|
|
|
|
401amx1969
AMC Apprentice
Joined: Nov/18/2012 Location: Qc, Canada Status: Offline Points: 53 |
Post Options
Thanks(0)
Quote Reply
Posted: Jan/04/2018 at 4:10pm |
|
Which EFI controller you gonna use?
|
|
|
69 AMX Supercharged
|
|
|
|
|
RADAMX
AMC Apprentice
Joined: Jul/09/2007 Location: Tucson Az. Status: Offline Points: 188 |
Post Options
Thanks(0)
Quote Reply
Posted: Jan/04/2018 at 4:23pm |
|
I use AEM in both race cars and in my 90s ford dually.
I am also using a AEM AQ1 data logger. Data log drive shaft . Rear shocks . 8 EGTs. Air temp water temp. Oil pressure. Fuel pressure. O2 sensor.rpm throttle position. And probably something else |
|
|
|
|
70Javelin360
AMC Apprentice
Joined: Feb/20/2008 Location: waukegan, il Status: Offline Points: 153 |
Post Options
Thanks(0)
Quote Reply
Posted: Jan/04/2018 at 9:47pm |
|
looking good!! good luck in 2018!! hows the tps going to work with that throttle body?
whats the planned ET?
|
|
|
http://www.cardomain.com/ride/2431219
|
|
|
|
|
RADAMX
AMC Apprentice
Joined: Jul/09/2007 Location: Tucson Az. Status: Offline Points: 188 |
Post Options
Thanks(0)
Quote Reply
Posted: Apr/02/2018 at 11:01am |
|
Well Back to the track for some test and tune with the EFI.
Defiantly running better and more tune able. 4/6/2018 at Tucson Drag way if anyone local wants to come out and say HI Looking for Some good 60 ft times |
|
|
|
|
RADAMX
AMC Apprentice
Joined: Jul/09/2007 Location: Tucson Az. Status: Offline Points: 188 |
Post Options
Thanks(0)
Quote Reply
Posted: Apr/09/2018 at 10:26am |
|
Well testing went OK.
Nothing special but It is tuning better. Still needs more fuel but that is just More passes. Actually Ran a 1.30 60 ft but it was spinning a little so time to adjust the suspension . Ran a 9.17 at 143 . far cry from the 152 before ,so time to add fuel . Hopefully it will be in the 8's next time out |
|
|
|
|
Post Reply
|
Page <1 6789> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Click for TheAMCForum Rules
Topic Options