|
|
|
Your donations help keep this valuable resource free and growing. Thank you.
|
'68 Rambler American Leaky Carb help?? |
Post Reply 
|
| Author | |
Qblue92 
AMC Apprentice 
Joined: Mar/25/2012 Location: Arlington Tx Status: Offline Points: 41 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: '68 Rambler American Leaky Carb help??Posted: May/03/2012 at 5:26pm |
|
My carb leaks a few drops when the shaft at the rear is turned. It seems to be coming out where my finger is indicating here.....Any hints on what would cause this??
 |
|
 |
|
|
6768rogues
AMC Addicted 
Joined: Jul/03/2007 Location: United States Status: Offline Points: 2500 |
Post Options
Thanks(0)
Quote Reply
Posted: May/03/2012 at 8:24pm |
|
Is it leaking around the throttle shaft? There is a bushing in there that can wear out. I have had so called rebuilt carburetors from major remanufacturers weep there and I had to send them back.
|
|
|
Why Ramblers? Chicks dig 'em. Whatever it is, I can take it apart.
Located near Rochester, NY |
|
|
|
|
Qblue92
AMC Apprentice
Joined: Mar/25/2012 Location: Arlington Tx Status: Offline Points: 41 |
Post Options
Thanks(0)
Quote Reply
Posted: May/03/2012 at 8:43pm |
|
That's where it seems to be leaking. What does the bushing look like?? I have a cruddy ancient rebuild kit and I'm not sure it its included.
|
|
|
|
|
FuzzFace2
AMC Addicted
Joined: Jul/05/2007 Location: Connecticut Status: Offline Points: 6373 |
Post Options
Thanks(0)
Quote Reply
Posted: May/03/2012 at 10:08pm |
|
All the kits I have bought never had shaft bushings. Maybe the older carb kits had them but I am going back to the early 80's Dave ----
|
|
|
75 GremlinX v8
76 GremlinX i6 (sons) 70 Javelin SST 390/4sp (360/5sp now) 70 Javelin 1/4 Drag car 360/auto |
|
|
|
|
6768rogues
AMC Addicted
Joined: Jul/03/2007 Location: United States Status: Offline Points: 2500 |
Post Options
Thanks(0)
Quote Reply
Posted: May/04/2012 at 1:25pm |
|
I know that when some places rebuild the carbs they put in a bushing. Maybe there is no bushing originally but if worn when rebuilt they could be drilled and bushed. I never took and original apart to check but assumed that installing a new bushing meant replacing an existing bushing. Perhaps that is not the case.
Anyway, if it is leaking it needs a bushing. Edited by 6768rogues - May/04/2012 at 1:27pm |
|
|
Why Ramblers? Chicks dig 'em. Whatever it is, I can take it apart.
Located near Rochester, NY |
|
|
|
|
tomj
AMC Addicted
Joined: Jan/27/2010 Location: los angeles Status: Offline Points: 591 |
Post Options
Thanks(0)
Quote Reply
Posted: May/06/2012 at 2:38am |
|
Just re-read your original post: if it leaks a bit only when you turn
the throttle shaft, and the engine is NOT running, that is likely NORMAL
for a carb with some shaft wear -- when you turn the shaft, it operates
the accelerator pump, which dumps liquid gas down the throat; with no
air flow likely it dribbles down the side of the bore, onto the shaft,
and out the worm bushing.
Patient: "Doctor, it hurts when I move my arm like this..." Doctor: "Don't move your arm like that." Minor shaft wear on an old carb is typical and harmless. The idle mixture screw will compensate for it; if the screw adjustment is close to normal don't worry about it. |
|
|
1963 American 440 hardtop
195.6 OHV, modded T-96 Twin Stick, 3.78 axle |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Click for TheAMCForum Rules
Topic Options