Your donations help keep this valuable resource free and growing. Thank you.
|
2.87s to 3.15s, need help, with set up? |
Post Reply | Page <1234> |
Author | ||
amc67rogue
AMC Addicted Joined: Nov/05/2008 Location: Phx. AZ. Status: Offline Points: 1578 |
Post Options
Thanks(0)
|
|
Try using the ring gear to rotate the pinion.
|
||
Keith Coggins 67Rogue X code
|
||
amc401t10
AMC Addicted Joined: Mar/09/2009 Location: east tn Status: Offline Points: 903 |
Post Options
Thanks(0)
|
|
good idea, ill try that. thanks
|
||
1-owner 74 gremlin x 401, t10,3.73 12 bolt,750carb,reed 250@50 cam, roller rockers,msd,offy int.
72 amc matador 401 727 84 j10 ,360, 727 1970 4-door rebel sleeper(455 pontiac,turbo 400) 79 spirit,4.2 |
||
amc401t10
AMC Addicted Joined: Mar/09/2009 Location: east tn Status: Offline Points: 903 |
Post Options
Thanks(0)
|
|
ps nice spread in muscle car review mag on a machine!!!
|
||
1-owner 74 gremlin x 401, t10,3.73 12 bolt,750carb,reed 250@50 cam, roller rockers,msd,offy int.
72 amc matador 401 727 84 j10 ,360, 727 1970 4-door rebel sleeper(455 pontiac,turbo 400) 79 spirit,4.2 |
||
tufcj
Supporter of TheAMCForum Supporter of TheAMCForum Joined: Jul/10/2007 Location: Watkins, CO Status: Offline Points: 4097 |
Post Options
Thanks(0)
|
|
I saw in a previous post you're using Prussian blue? That's really designed for higher pressure applications than gear marking (like checking bearing/race for wear). Use white or yellow gear marking grease and you'll get a clearer and more reliable reading.
I usually mark 3-4 teeth on the ring gear in 3 places around the ring gear, then turn the carrier a full turn. I have seen a couple of instances where run-out in the ring gear or carrier will affect the contact pattern, especially with old/used parts. Bob tufcj |
||
69 AMX
74 Javelin AMX 67 Rogue If you need a tool and don't buy it... you'll eventually pay for it... and not have it. Henry Ford |
||
one bad rambler
AMC Addicted Joined: Jan/09/2008 Location: On The Island Status: Offline Points: 2007 |
Post Options
Thanks(0)
|
|
|
||
68 AMX 390 4 Speed,68 American,64 American 2 Door Wagon Altered Wheelbase,78 Concord Build 360,727,8.8
|
||
Jeeper80
AMC Fan Joined: Apr/25/2017 Location: Hawaii Status: Offline Points: 15 |
Post Options
Thanks(0)
|
|
Accordingto Randy's Ring and Pinion, used gears should be set for optimum pattern on the coast side.
|
||
amc401t10
AMC Addicted Joined: Mar/09/2009 Location: east tn Status: Offline Points: 903 |
Post Options
Thanks(0)
|
|
an 18 wheeler mechanic friend suggested white spray paint
, let it tack bout 3min then roll. I'm trying that next. thanks all.
|
||
1-owner 74 gremlin x 401, t10,3.73 12 bolt,750carb,reed 250@50 cam, roller rockers,msd,offy int.
72 amc matador 401 727 84 j10 ,360, 727 1970 4-door rebel sleeper(455 pontiac,turbo 400) 79 spirit,4.2 |
||
Jeeper80
AMC Fan Joined: Apr/25/2017 Location: Hawaii Status: Offline Points: 15 |
Post Options
Thanks(0)
|
|
|
||
6PakBee
Supporter of TheAMCForum Charter Member Joined: Jul/01/2007 Location: North Dakota Status: Offline Points: 5458 |
Post Options
Thanks(0)
|
|
This would be a red flag to me. Something isn't right here. As to setting up used gearing to new specs, I've only done it twice in my life and both times I had no problems with performance. I mean really, if you buy a used ring and pinion how do you know what the previous setup was? |
||
Roger Gazur
1969 'B' Scheme SC/Rambler 1970 RWB 4-spd Machine 1970 Sonic Silver auto AMX All project cars. Forum Cockroach |
||
401MATCOUPE
AMC Addicted Joined: May/20/2010 Location: Salisbury, MD Status: Offline Points: 5367 |
Post Options
Thanks(0)
|
|
I am with Roger here....I have been watching this thread and have built dozens of AMC 20's with used AMC gears and never had a problem. I have all the Kent Moore tools as shown in the TSM and NEVER had to but more then a .105 shim in the pinion. Every rear has been quiet and never come back, I even did a hybrid of the two Types of carriers in 1965 that required a space of ,100 on the carrier to get proper measurements and that car has a lot of miles on it and will be at Gettysburg and has been to lots of other shows....all used parts, except new bearings and seals....owner just want a ratio change.
|
||
Ross K. Peterson
68X,GoPac,343,AT,52A(1stCar) 68X,GoPac,390,4sp,52A 69X,GoPac,390,4sp,64A 70X,GoPac,390,4sp,87A,8 70X,GoPac,390,4sp,BBO,8 70 Jav SST,390,AT,BSO 74MatX,401,AT,Prototype 74MatX,401,AT |
||
Post Reply | Page <1234> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |