Your donations help keep this valuable resource free and growing. Thank you.
|
258 rebuild break in questions |
Post Reply |
Author | |
Gelalthedamned
AMC Nut Joined: Nov/28/2014 Location: Athens ga Status: Offline Points: 376 |
Post Options
Thanks(0)
Posted: Aug/04/2017 at 7:11pm |
Let's say you had your 258 rebuilt and you're gonna run it for break in.
Vacuum advance hooked up or plugged ? Pcv hooked up or plugged? Weber 38 set to initial tuning or make it rich cause we want gas? Static timing set where...8*btdc? Maybe 10 or 12? Floor the throttle when cranking, part throttle or leave it closed to start? (Obviously this is my first rebuild break in) |
|
Calamity - 73 Gremlin X zombie rod (daily driver)
|
|
DaemonForce
AMC Addicted Joined: Jul/05/2012 Location: Olympia, WA Status: Offline Points: 1070 |
Post Options
Thanks(0)
|
Normal functioning procedure with vac advance hooked up, PCV plumbed correctly and tuned just slightly rich for safety. Timing probably depends on fuel grade more than anything but you do you. I'm thinking this should be driven normally for like 20 minutes. I would be doing a flat 2000-2200 run for cam break-in just because my setup is like a combined distance vehicle and jobber.
|
|
1971 Javelin SST
American 304 2v | FMX | AM20-3.31 1983 American Limited Jeep 4(.7)L S-MPFI | 1982 NWC T-5M (4.03/.76) | Dana30IFS/35-2.72 |
|
Gelalthedamned
AMC Nut Joined: Nov/28/2014 Location: Athens ga Status: Offline Points: 376 |
Post Options
Thanks(0)
|
Thanks..also radiator cap, closed loose or off?
|
|
Calamity - 73 Gremlin X zombie rod (daily driver)
|
|
Gelalthedamned
AMC Nut Joined: Nov/28/2014 Location: Athens ga Status: Offline Points: 376 |
Post Options
Thanks(0)
|
P.s. It's a hot rod, driving normally is rumored a no-no for the first 100 miles or so. I've heard I drive it like a granny and keep it under 60mph. I might break the heck out of something driving the way I normally drive.
|
|
Calamity - 73 Gremlin X zombie rod (daily driver)
|
|
scott
AMC Addicted Joined: Jul/10/2007 Location: Wildwood Pa. Status: Offline Points: 3502 |
Post Options
Thanks(0)
|
This is a good thread on rebuilt engine first start: http://theamcforum.com/forum/update-rebuild-first-startup-questions_topic87977.html
|
|
Gelalthedamned
AMC Nut Joined: Nov/28/2014 Location: Athens ga Status: Offline Points: 376 |
Post Options
Thanks(0)
|
There are lots of words in that thread...it's gonna take a bit to read that
|
|
Calamity - 73 Gremlin X zombie rod (daily driver)
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |