Your donations help keep this valuable resource free and growing. Thank you.
|
Gaterman roller lifters |
Post Reply |
Author | |
cone
AMC Addicted Joined: Apr/17/2010 Location: pennslyvania Status: Offline Points: 572 |
Post Options
Thanks(0)
Posted: Feb/22/2020 at 6:29am |
Has anyone used Gaterman roller lifters or know anything about them? They told me that they are the same type that are used on Chrysler B applications and have tested them on an AMC 390 with no issues. They sell for $450 a set.. www.gatermanproducts.com/amc-retrofit.html
|
|
1987 J20, 87 Grand Wagoneer,70AMX,
|
|
JGRANTAMX
AMC Addicted Joined: Jun/02/2017 Location: Maine Status: Offline Points: 1703 |
Post Options
Thanks(1)
|
I bought two sets of these on ebay another member here used them with good results, they measure .904".
J Edited by JGRANTAMX - Feb/22/2020 at 7:59am |
|
cone
AMC Addicted Joined: Apr/17/2010 Location: pennslyvania Status: Offline Points: 572 |
Post Options
Thanks(0)
|
|
|
1987 J20, 87 Grand Wagoneer,70AMX,
|
|
JGRANTAMX
AMC Addicted Joined: Jun/02/2017 Location: Maine Status: Offline Points: 1703 |
Post Options
Thanks(0)
|
Look close at the pictures those Gaterman lifters look exactly the same except for the added oil holes could be the same china factory?
|
|
JGRANTAMX
AMC Addicted Joined: Jun/02/2017 Location: Maine Status: Offline Points: 1703 |
Post Options
Thanks(0)
|
I did some reading on different brand hydraulic roller lifters with mixed reviews, most of the brand names had good reviews the retro-fit seemed to have the most issues also high RPM's above 7000 might be a concern. There are Howards/Morel? hydraulic rollers for AMC on ebay $416 shipped, they list measurements of .903"? there has been discussion about lifter diameters here I am not sure if .903" could be a problem. I did find an older article about Gaterman roller lifters see below. The ebay roller lifters I bought might end up in stock 304 and 360 I have engines someday?
J Bill Gaterman is quoted on Speedtalk about his lifters and the fact they are assembled here with all Chinese parts.
|
|
cone
AMC Addicted Joined: Apr/17/2010 Location: pennslyvania Status: Offline Points: 572 |
Post Options
Thanks(0)
|
Yea, you're right, they do look exactly the same. I sent a message to the guy selling them on ebay asking where they are made. I got a response in broken English telling me they were great lifters and had been in business for 10 years and they are made in Shanghai China.
|
|
1987 J20, 87 Grand Wagoneer,70AMX,
|
|
Heavy 488
AMC Addicted Joined: Apr/27/2019 Location: In the Status: Offline Points: 3557 |
Post Options
Thanks(1)
|
Yes, all the Mopar and AMC guys in China swear by them.
|
|
sweatlock
AMC Addicted Joined: Apr/28/2014 Location: Largo, FL Status: Offline Points: 3322 |
Post Options
Thanks(0)
|
Don’t get Shanghaied.
I would trust good used 50+ year old American-designed and made stuff before using budget Chinese-made internal or valve train engine parts. My rule of thumb is, if it moves or is internal to the engine, buy the best new parts regardless of price and with the best reputation - if money is an issue, then just go with good factory stock parts.
Edited by sweatlock - Feb/23/2020 at 10:58am |
|
JGRANTAMX
AMC Addicted Joined: Jun/02/2017 Location: Maine Status: Offline Points: 1703 |
Post Options
Thanks(0)
|
I have read Morel makes Howards and several other brands there are many complaints about Morels being noisy on start up and after several K miles although most noted there was no performance difference just noise. Same issue with Comp Cams noisy even when hot, ISKY sells Johnson and Johnson lifters have good reviews all around they are quiet but expensive.
J
|
|
wrebelmachine
AMC Apprentice Joined: Aug/08/2019 Location: SW Missouri Status: Offline Points: 162 |
Post Options
Thanks(0)
|
Not sure who makes them but Schneider cams had them in the $450 range recently.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |