Your donations help keep this valuable resource free and growing. Thank you.
|
amc 360 rpm to 7k |
Post Reply | Page <123 |
Author | |
racerM95
AMC Apprentice Joined: Dec/16/2018 Location: Winnipeg Canada Status: Offline Points: 37 |
Post Options
Thanks(0)
|
Joe Elmore Power Nation TV did a VERY stout 360 Build, even shows dyno results... Bottom of the page even gives part numbers... https://www.powernationtv.com/episode/HP2012-04/amc-other-engine-build-up
|
|
pfordamx
AMC Apprentice Joined: Sep/13/2010 Location: OKC Status: Offline Points: 173 |
Post Options
Thanks(0)
|
7000 rpm isn't a issue we ran a stock rodded with arp bolts 390 for years with forged pistons and healthy hydraulic that would trap inbetween 6800-7000. if the block is prepped correctly and your using a miloden pan or something similar with external pickups its not an issue. amcs are easy to build to live at that rpm. especially a stock stroke 360 it won't have the piston speed of something like a 401 or 390 or some of the 4.00 stroker crank motors, or engines with offset ground cranks. i have a indy headed 433 thats a street motor 9.5 to 1 solid lifter cam thats seen 7300 because we had to deep of a gear in the car first time out got it right now were we shift at 6800 and traps about the same runs 10.50s at 124 in a 3150lb amx. its nice if you can do it without the rpm but there are a ton of amcs out there that see 6500-7000 regularly without issue.
|
|
Post Reply | Page <123 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |